1) PS5 controller and console PVC removable adhesive, strong adhesion, with ventilation slots, adhesion without foam, no glue residue, no shrinkage, no warping
2) High quality vinyl stickers. It can protect your device from scratches, fading and peeling.
3) Use ultra-high-resolution graphics and ultra-glossy for printing.
installation
1) Clean the surface as thoroughly as possible. Most nonstick problems are caused by some type of oil or grease on the equipment prior to installation.
2) Peel a piece of skin from the paper insert. Do not let anything touch the adhesive surface.
3) Determine the position of the square. Start from the corner to the surface with your fingers or thumbs and then move them over the entire surface.
4) If a piece is not straight, you can gently lift it up. Do not stretch it from its original size.
5) If applied carefully, no air bubbles should remain under the skin. During the installation process, any air that may become trapped under the skin will disappear over time.
Contenu: 1 * PS5 console front skin 1 * PS5 console behind the skin 2 * control handle skin
Precision : The PS5 skin was specially developed and pre-cut, which is very suitable for your Playstation 5.
Protection : Manufactured with ultra-thin, ultra-durable, stain-resistant laminate vinyl in order to effectively protect your gear from dings, scrapes, dust, and the wear and tear of everyday use.
Easy to use and implement : It does not damage the surface and does not leave any glue when replaced or torn off. {Please heat and tear open slowly with hot air.
Easy clean : You can clean it directly with a wet towel, and then use a dry towel or paper towel to dry it, which is exactly the same as the new sticker.
100% SATISFACTION : All PS5 accessories have been carefully checked before sale. If it does not meet your requirements, please contact our customer service.
Your search for PS5 skins is about to end?
Here are 3 reasons you will love it:
1) PS5 controller and console PVC removable adhesive, strong adhesion, with ventilation slots, adhesion without foam, no glue residue, no shrinkage, no warping
2) High quality vinyl stickers. It can protect your device from scratches, fading and peeling.
3) Use ultra-high-resolution graphics and ultra-glossy for printing.
installation
1) Clean the surface as thoroughly as possible. Most nonstick problems are caused by some type of oil or grease on the equipment prior to installation.
2) Peel a piece of skin from the paper insert. Do not let anything touch the adhesive surface.
3) Determine the position of the square. Start from the corner to the surface with your fingers or thumbs and then move them over the entire surface.
4) If a piece is not straight, you can gently lift it up. Do not stretch it from its original size.
5) If applied carefully, no air bubbles should remain under the skin. During the installation process, any air that may become trapped under the skin will disappear over time.
Contenu:
1 * PS5 console front skin
1 * PS5 console behind the skin
2 * control handle skin